MR4Engine202
06-08-2012, 01:43 AM
I have a bunch of stock parts from a 400ex i am parting out, what i have listed is all i have available. everything is OBO
All parts are in perfect condition unless otherwise noted, if you have any questions or need pictures just let me know please.
Complete engine, ran good when taken out, no ticks no knocks. now for the bad the case next to the sprocket had a small crack in it at one point that had been jb welded but ive had the atv for over a year and have never had it leak - $700 (I would be willing to separate the top end from the bottom end for the right prices)
oil cooler - $15
oil tank - $15
air box with good air filter - $10
CDI box - $10
Ignition coil -$10
Regulator/ rectifier - $10
Carburetor - $65
Full set of a-arms - $100 ( bottom left is a brand new arm, upper right ball joint is starting to get a little play in it nut is not bad, and the other 2 are in great condition)
Bearing carrier - $65 (carrier looks a little bear up were the holes are to adjust chain tension but carrier has brand new bearings that have never seen use)
tie rods with ends - $25 (one side has brand new ends, other side the ends are in perfect shape)
All parts are in perfect condition unless otherwise noted, if you have any questions or need pictures just let me know please.
Complete engine, ran good when taken out, no ticks no knocks. now for the bad the case next to the sprocket had a small crack in it at one point that had been jb welded but ive had the atv for over a year and have never had it leak - $700 (I would be willing to separate the top end from the bottom end for the right prices)
oil cooler - $15
oil tank - $15
air box with good air filter - $10
CDI box - $10
Ignition coil -$10
Regulator/ rectifier - $10
Carburetor - $65
Full set of a-arms - $100 ( bottom left is a brand new arm, upper right ball joint is starting to get a little play in it nut is not bad, and the other 2 are in great condition)
Bearing carrier - $65 (carrier looks a little bear up were the holes are to adjust chain tension but carrier has brand new bearings that have never seen use)
tie rods with ends - $25 (one side has brand new ends, other side the ends are in perfect shape)