custom built arms,stem ,pegs back in progress

[greenman]

Nevever fails always a set back in life! After breaking my back last year and healing up to a full recovory i am almost done with my custom a arm ,foot pegs, etc that i started on for a desert race build

[dustin_j]

Sounds interesting, do you have any pictures?

[greenman]

some pics

[greenman]

pics

[greenman]

pegs i built

[greenman]

motor mounts

[greenman]

Front bumper

[greenman]

bottom of stem

[chronicsmoke]

Very cool!

[dustin_j]

Sweet!

[represent618]

Nice work man.

[greenman]

FOR rear grab bar it wiill have mounts for a rear sprocket and number plate and just zip tie about 6 links to the spare sprocket a then i have a front bumber that will have some trick light weight socket tool too get wheel off then back on if sprocket if or when it gets damaged ! DNF OR Finish ? goes a long ways when telling about a good ride or race ha ha thanx have a good one to all who ride

[greenman]

In the past i used the Delron Bushing bearings or needle bearing set up they just seem to be alot of maintnace and more prone to getting dirt dust etc into them. SO this time i machined the lower arms to accepet the stock factory honda spherical bearings and seals > its amazing how much free movment this set up has !! no drag at all plus you get seals that are amazing for keeping out dirt and grim!!!

[greenman]

stem is set up to fill with a liquid to see if it takes out or helps reduce some vibration ( soon to test)