PDA

View Full Version : Can am with 250 engine / nobody built one ?


tonnerre
05-08-2012, 03:00 AM
:(
hontrx265r
05-08-2012, 07:53 AM
There is one here search...
Langbolt
05-08-2012, 10:25 AM
You mean a DS450 with a Rotax 257cc Two-Stroke ?

Read here:

http://www.exriders.com/vbb/showthread.php?s=&threadid=466354

:devil:
tonnerre
05-08-2012, 11:03 AM
No. DS 450 with dirtbike 250 engine. CRF, RMZ, ......
Langbolt
05-08-2012, 06:48 PM
If you're on Facebook....look up Six5Design.....they put a KX80 motor in a DS450 & and I saw a CRF motor (not sure if it's a 450 or 250) in the DS too!

:devil:
Sandsjbyz22
05-09-2012, 11:05 AM
Here are a couple of the DS450 conversions from Six 5 Designs
Sandsjbyz22
05-09-2012, 11:06 AM
And the CR motor
tonnerre
05-11-2012, 12:04 AM
Other pics ?
LT250RMan
05-11-2012, 08:47 AM
What are you planning to do with all the engine vibrations from the non counter balanced motor ?
Logan #34's Dad
05-12-2012, 10:41 AM
The 1st picture is the DS with a Honda 150R engine to be ran in the Super-mini class at National's. It will be ran by Nick Major.
The 2nd pic is the same ds with a CR85..... it was removed for the 150R engine.
tonnerre
05-20-2012, 02:11 AM
What are you planning to do with all the engine vibrations from the non counter balanced motor ?

Good question !!
What will you do ?
Sandsjbyz22
05-20-2012, 07:37 AM
I'm not the one who built the bike, but from what I can tell there has not been any issues with vibrations from the smaller 2stroke engines. They have been building minis for years with these engines without any issue. Start talking about a CR500 motor then yes vibration becomes an issue.
tonnerre
05-20-2012, 11:18 AM
What are you planning to do with all the engine vibrations from the non counter balanced motor ?

Good question !!
What will you do ?

And with a 4 stroke engine ?