TaylorTRX
05-02-2012, 08:22 PM
wiring lights to 250x from scratch need advice
i built my girl a 1988 honda 250x a few years ago i got it cheap and beat up and basically did a frame up resto (pink frame and graphics lol....im adding 2 offroad headlights to it now however, i had removed the whole light switch assembly
i found 2 cut white wires next to a cut gray one .......only the one white one is hot when its running so i wired into that and grounded to the frame..
should i run an inline? what amp fuse? theres no battery its kick start only
thats the only wires i found that are left they were burried near the tank
it worked during mock up for the bracket i made that bollts to the origional holes on the steering stem but not really sure if i should run it long with no fuses or switch any advice would be great
thanks
scott
i built my girl a 1988 honda 250x a few years ago i got it cheap and beat up and basically did a frame up resto (pink frame and graphics lol....im adding 2 offroad headlights to it now however, i had removed the whole light switch assembly
i found 2 cut white wires next to a cut gray one .......only the one white one is hot when its running so i wired into that and grounded to the frame..
should i run an inline? what amp fuse? theres no battery its kick start only
thats the only wires i found that are left they were burried near the tank
it worked during mock up for the bracket i made that bollts to the origional holes on the steering stem but not really sure if i should run it long with no fuses or switch any advice would be great
thanks
scott