need help with my lug nuts!

[HiperEX]

well i got all my lugs off but i cant get 3 off the back tires what can i do u get them out i snapped 3 extensions, 3 sockets its just not working for me would a air drill or whatever work?

[Silverfox@C&DRacing]

Get a hold of an impact for the air compressor ;)

[MOUSE]

if that dont work you may have to cut them off :confused2

[QuadTrix6]

spray some liquid wrench in there

[bongwater200]

$110 Snap-On ratchet works for me! That, or Mr. Ingersoll-Rand.

When you finally get them off, put some SOLID anti-sieze on the studs. Not the goopy, greasy kind that you put on with a brush, but the kind that comes in a stick. That stuff also works well on stainless bolts for anyone who's ever sheared them off because of a slight burr.

[Str8Wicked]

Just get a breaker bar to get them loose. If they don't come off with a breaker bar than you better get a welder......

[Str8Wicked]

Just get a breaker bar to get them loose. If they don't come off with a breaker bar than you better get a welder......

[Guy400]

Nothing like having your nuts in a bind:eek:

The easiest thing to do would be to use an impact wrench on it with a socket that's specifically made for air guns (thicker, hardened steel sockets). That should get them off for you. If that's not a possibility than get a breaker bar with an impact socket and slip a 3-foot piece of pipe over the breaker bar. If that doesn't work than Sawz-all the axle in half, remove axle, purchase new axle, hubs and rims and you should be all set.

[SGA]

Yes, use never sieze on them, and do not over tighten them. good and snug is plenty. I think 47 ft pds is correct. Once i got a torque wrench, I realized i had been overtightening alot of bolts.