Couple Questions

[Honda4LifeWes36]

Been doing a little riding lately and now when I pull in the clutch, the quad keeps going which means the clutch isn't working right. Can I just tighten something up or does it need a whole new clutch?

Also, lately the spark plug has been coming loose mid ride which is a pain. I've thought I've tightened it enough but still comes loose!

Any help would be appreciated. thanks!

[CJM]

Try adjusting the clutch at the lever as well as the cover next to the header.

If you cant get it to stop creeping then it might be time for a new clutch

As for the spark plug: either you didnt tighten it enough or the threads are messed up. You using the 400ex tool or a socket?

[Honda4LifeWes36]

400ex Tool

Last I tried with a socket, there wasn't enough room to get it in there.

[CJM]

Sure your making it snug enough? Id try another plug just to make sure.

[Honda4LifeWes36]

Got the plug back in there snug. Hopefully it stays put this time.

As for the clutch, I went to tighten it up and notice the screw in part was broken so I had to temporarily fix it until I can get a new one.

[TheAwesomehonda]

Originally posted by Honda4LifeWes36
Got the plug back in there snug. Hopefully it stays put this time.

As for the clutch, I went to tighten it up and notice the screw in part was broken so I had to temporarily fix it until I can get a new one. Are you telling about the adjuster on the lever or right crank case cover?

[quadracer556]

as you discovered,if its creeping then you have cable or lever/lower cable mount thread issues.if it doesnt want to go then youre looking at worn clutch.

[Honda4LifeWes36]

The adjuster on the bars was broke. Where your can adjust it by either screwing in or out.

[TheAwesomehonda]

Originally posted by Honda4LifeWes36
The adjuster on the bars was broke. Where your can adjust it by either screwing in or out. Well get that replaced/fixed and then try adjusting it..