Nick24
04-07-2012, 09:13 PM
Hi, I am looking to buy a 450r carb for my 400ex. I have seen on here some people buy new ones from servicehonda.com and some buy used off of ebay. I see that the new ones on servicehonda are like $190 and most used ones on ebay are like $160-200.
I am wondering if the new ones are sent with the hot start, throttle cable, and fuel line. Most of the used ones have the throttle cable and hotstart, but I am a little worried buying used not knowing how good of shape it is in.
Also, where do you think I should start with jetting when I do get one. I am in Iowa at about 1000ft
My Mods include
- Port and Polish
- 416 11:1 wiseco
- Stage 2 Hotcam
- EHS lid
- HMF comp series exhuast
- Ground headpipe welds
Thank You, Nick
I am wondering if the new ones are sent with the hot start, throttle cable, and fuel line. Most of the used ones have the throttle cable and hotstart, but I am a little worried buying used not knowing how good of shape it is in.
Also, where do you think I should start with jetting when I do get one. I am in Iowa at about 1000ft
My Mods include
- Port and Polish
- 416 11:1 wiseco
- Stage 2 Hotcam
- EHS lid
- HMF comp series exhuast
- Ground headpipe welds
Thank You, Nick