PDA

View Full Version : Wanting to Trade



Fluid400
03-04-2003, 03:50 PM
I want to trade a custom alum. air box 400EX (see pic) for 2 stock rear rims. Any one interested pm me or Kawsam62 for more inf

Str8Wicked
03-04-2003, 03:52 PM
You should put this under the 4 sale section and wanted section...

insane250Racer
03-04-2003, 05:33 PM
hey my friend has alot of stock tires he will prob trade you for them my e mail is insane250racer@netscape.net or my aim name is insane250racer ...ill talk to him for you

FastHonda400ex
03-06-2003, 01:12 AM
Do you have a lid to go with it, or do you use the stock lid? Anyway, I've got some rear stock wheels and some ITP spider trak tires that are at 90% tread I'll trade ya for the airbox. Let me know with a PM.

Thanks,
Doug

quadcustoms
03-06-2003, 05:32 AM
ill trade you i have stock or itp rolled bead

Fluid400
03-06-2003, 07:43 AM
Quad PM Kawsam62 with details and we will start fabing your airbox.

KAWSAM62
03-06-2003, 07:46 AM
hello it does not use a lid i use a uni filter with a waterproof outerwares and the top of the alum box seals against the botom of the seat the bat is reloated to in the box it made of .09 6061 t4 aluminum and tig welded togthere the air boot on the carb is modified to go to a single hole on the front of the air box ,the white snorkle tube is removed the wiring harness is rewrapped and moved inside the box with all electrical comp except the triange shaped regulator witch is left in the fact position on the frame next to were the bat used to be ,all air into the box come from the back to prevent a dirt and trach problem usually in real dusty cond all that is req is to clean the outerwares every ride with puple power and the filter cleaned every 5 or 6 times it is fasened by rubber coated uclips which wrap around the frame tube in 4 locations then bolted directly to the alum box with a nut and bolt this install is much stronger than the plastic box any questions pm or post tx all.:cool:

Fluid400
03-06-2003, 04:32 PM
bump:devil

3x440ex
03-08-2003, 06:26 AM
i have a set of factory wheels and tires i'll trade you....the tires have about 40% tread left on them..but the wheels are in good shape.

KAWSAM62
03-08-2003, 07:24 AM
hey quadcustoms your pm box is full and i cant send you a pm :eek:

KAWSAM62
03-12-2003, 06:59 AM
i have all the parts anyone wanna trade?:rolleyes:

KAWSAM62
03-17-2003, 02:05 AM
:devil

Fluid400
03-20-2003, 04:16 AM
we have plenty more boxes to trade for spare parts.
Built 10 boxes to trade

quadcustoms
03-20-2003, 01:44 PM
gimme a call 615 476 4134
or email me at bullard1974@comcast.net thanks

Fluid400
03-21-2003, 02:23 AM
Quad check your email

KAWSAM62
03-27-2003, 01:43 AM
anyone serious about wanting to trade 2 rear 400 ex rims!:macho

SANDTRAX361
03-29-2003, 05:07 PM
i got a set of stock 9 inch rears off a 400ex ill trade ya or ill trade ya all these banshee wheels i have. 1 set of 10's 1 set of 9's and a mismatched set of 10's for the front. ill sell or trade any of these. id like to tradea ll teh banshee wheels for a set of sand paddles for the rear to put on my stock rims.
later
grant
an air box would be perfect. can you put a K&N filter in one too. cause thast what i run.
grntsndr@yahoo.com

Fluid400
04-01-2003, 05:53 AM
Sand check your email.

everyone else
we have 10 air boxes left to trade for spare 400EX parts.
pm me or kawsam62 for details

KAWSAM62
04-06-2003, 03:20 AM
hello how about some factory front 400ex rims or douglas red label front rims to trade for a air box?:cool:

Fluid400
04-07-2003, 05:54 AM
Installation manual is almost ready.