1998 cr250 ignition

[superevil]

Ok i know the digital 01 cr250 ignition is the best option for a cr ignition,but will other years of the cr ignition bolt to the esr adapter plate?

Basicaly i messed up my 01 cr250 ignition,but i can pick up a complete 98 ignition for cheap,will it work with the esr plate?

[latheboy]

it will bolt up to the adapter plate. I ran one for a while on my 350pv. It didnt seem to perform any different than the 01 ignition I have now. But the components for the '98 are bulkier and harder to stow away.

Keith

[superevil]

Im thinking about getting the powerjet carb that works with the 98 ignition

[latheboy]

You may want to get ahold of wilkin250r here on the forum. A while back I sold him a complete '98 cr250 ignition with the powerjet carb. Dunno what he has done with it... I think it was to wilkin250r anyways.

[wilkin250r]

It was indeed me. I had a motor that had no spark, and when I put the 98 ignition on it, it fired right up. However, that wasn't the only problem that motor had, and by the time I fixed everything, I put a different ignition on it.

Unfortunately, I don't have much input in that respect. The ignition seemed to work just fine because that motor fired right up, but I never ran it on a real performance motor so I can't give any input from a performance aspect.

Getting that powerjet carb working is still a project in the back of my mind, but so far it hasn't materialized beyond concept.

[2muchquad]

i imagine ignitions from 92 and up would work.i had the 95 cr250 ignition on mine few yrs back....:)