Klawson
03-06-2012, 03:15 AM
All parts are used and from an 88 250r unless otherwise specified. All items are sold as is and most will not include hardware. I have tried to be up front about everything, but I didn't ride the bike much due to a broke frame. I will update list as items get sold. Shipping is included. I will negotiate price if you purchase mulitple items. Paypal is my method of transaction, but I will need the fee to be covered by the buyer unless given as a gift. I will try to get pictures upon request. Not really interested in any trades except for hiper wheels. Feel free to ask questions. I'm located in the Indianapolis area and will reduce the prices for local pick up. I can be reached here, by pm, or text 31777715six4. I work 3rd shift and sleep during the day so please be patient. Thanks!!
Kris
$50 A Arms, front, factory, dented and need ball joints and bushings replaced, includes spindles
$50 Complete front brake assembly minus rotors. Both caliper, lines, and master with lever, all worked fine when removed. clamp bracket is not correct but still works.
$40 Front hubs w/ rotors, will need bearings
$60 front stock shocks
$20 dogbone rear shock linkage, good bushings
$40 Aluminum Radiator Scoops, multi fins, nice looking design.
$35 88 Rear shock linkage, will probably need bushings
$10 Clutch Cable and lever, used
$25 Kick start, good pivot
$50 Complete rear brake system, caliper with block off, master cylinder, and reservoir
$15 factory radiator overflow
$60 88 Red OEM gas tank w/ petcock and cap
$40 OEM radiator, is dented on one side, but does not leak and functioned fine
$40 OEM airbox, no lid w/ uni air filter
$50 Keihin PJ 38mm carb, needs choke piece replaced. I think choke piece can be ordered through sudco
$10 factory bar clamps
$125 LRD pipe
$50 DG silencer, with new packing for silencer
$20 Front engine mounts
$15 Carb to airbox boot
$30 Headstay
$10 OEM radiator mounts
$15 swingarm pivot bolt
$10 OEM chain roller with shock reservoir bracket
$20 aluminum 1.5 inch bar risers
$10 Steering stem clamp, will need a new bushing
Things I'm not willing to ship currently
$700 – 88 complete engine. Less than 30 hrs on rebuild. Has hotrods crank, bored .060 over, pro design cool head, aftermarket reeds, ran and shifted great when removed from the bike. Also has complete harness included. Did not have taillight or headlight and has a pro armor t-handle kill switch
$50 21x12x8 Skat Trak Hauler paddle tires mounted on polished aluminum wheels. Wheels are unilug Honda & Yamaha sport quads. The tires do leak down slowly, I think some bead sealer would take care of this issue.
$125 Red OEM front plastic, race cut, does show some age, has spiderwebbing, does not include hood. Red OEM rear plastic, not cut, does show some age, has one crack that has been stitched.
I also have most of the hardware from the quad, so if you're needing some nuts and bolts, I might have it.
Kris
$50 A Arms, front, factory, dented and need ball joints and bushings replaced, includes spindles
$50 Complete front brake assembly minus rotors. Both caliper, lines, and master with lever, all worked fine when removed. clamp bracket is not correct but still works.
$40 Front hubs w/ rotors, will need bearings
$60 front stock shocks
$20 dogbone rear shock linkage, good bushings
$40 Aluminum Radiator Scoops, multi fins, nice looking design.
$35 88 Rear shock linkage, will probably need bushings
$10 Clutch Cable and lever, used
$25 Kick start, good pivot
$50 Complete rear brake system, caliper with block off, master cylinder, and reservoir
$15 factory radiator overflow
$60 88 Red OEM gas tank w/ petcock and cap
$40 OEM radiator, is dented on one side, but does not leak and functioned fine
$40 OEM airbox, no lid w/ uni air filter
$50 Keihin PJ 38mm carb, needs choke piece replaced. I think choke piece can be ordered through sudco
$10 factory bar clamps
$125 LRD pipe
$50 DG silencer, with new packing for silencer
$20 Front engine mounts
$15 Carb to airbox boot
$30 Headstay
$10 OEM radiator mounts
$15 swingarm pivot bolt
$10 OEM chain roller with shock reservoir bracket
$20 aluminum 1.5 inch bar risers
$10 Steering stem clamp, will need a new bushing
Things I'm not willing to ship currently
$700 – 88 complete engine. Less than 30 hrs on rebuild. Has hotrods crank, bored .060 over, pro design cool head, aftermarket reeds, ran and shifted great when removed from the bike. Also has complete harness included. Did not have taillight or headlight and has a pro armor t-handle kill switch
$50 21x12x8 Skat Trak Hauler paddle tires mounted on polished aluminum wheels. Wheels are unilug Honda & Yamaha sport quads. The tires do leak down slowly, I think some bead sealer would take care of this issue.
$125 Red OEM front plastic, race cut, does show some age, has spiderwebbing, does not include hood. Red OEM rear plastic, not cut, does show some age, has one crack that has been stitched.
I also have most of the hardware from the quad, so if you're needing some nuts and bolts, I might have it.