Bent bumper?

[redrider419]

What's the best way to fix a bent bumper? Heat torch? It's off about an inch on one of the mounts

[redrider419]

Okay maybe half an inch.. Lol

<a href="http://s7.photobucket.com/albums/y259/Redrider419/?action=view&amp;current=Bumper.jpg" target="_blank"><img src="http://i7.photobucket.com/albums/y259/Redrider419/Bumper.jpg" border="0" alt="Photobucket"></a>

[rayman375]

You cant just push it into position and put the bolts in?

[redrider419]

If your facing the front of the quad, the top 2 bolts go in with some force, the bottom right goes in about halfway, and the bottom left cant even get threaded in, i guess this will have to do since its only going to be in the sand, and don't want to pay to get it re-chromed yet.

[Higgy87TRX425]

I've had similar problems in the past. I would try and see if I could get the 3 bolts in the bumper and then get some leverage with a piece of pipe or a large adjustable wrench and pull on it. Or you could try putting it in a vice and hitting it with a soft plastic or rubber hammer maybe a deadblow and see if you can get it to move that way. Sometimes brute force is the only way, but you may sacrafice ur chrome a little. Good luck! You can always heating it up which will definately ruin your chrome, but it will definately bend for ya!
Thanks Higgy