1-1/8th bar clamps for stock stem

[capecod400ex]

Can someone point me in the direction of this I dont really like the way the adapters look but all the mount I've seen you need a after market stem.

[DnB_racing]

Originally posted by capecod400ex
Can someone point me in the direction of this I dont really like the way the adapters look but all the mount I've mount you need a after market stem. are you looking for something like this?

http://cgi.ebay.com/ebaymotors/Honda-TRX250r-oversize-handlebar-clamps-250r-FAT-bar-adapters-450r-400ex-YFZ-/330693698301?pt=Motors_ATV_Parts_Accessories&hash=item4cfee162fd

[capecod400ex]

Originally posted by DnB_racing
are you looking for something like this?

http://cgi.ebay.com/ebaymotors/Honda-TRX250r-oversize-handlebar-clamps-250r-FAT-bar-adapters-450r-400ex-YFZ-/330693698301?pt=Motors_ATV_Parts_Accessories&hash=item4cfee162fd

Thats what I'm trying to avoid i just want the clamps to be 1-1/8 not adapters into the 7/8s to make it 1-1/8

[jjohns5]

If you decide that you want these clamps I have a new set (black) that raise the bars an inch and make so you can run 1and1/8" oversize bars, pretty much the same as the ebay item shown..$35 shipped

[brewster426]

Those clamps will work. I know it looks janky but I have those on my bike. I had a pretty bad wreck and it broke the stem, didn't do anything to the adapters.

[capecod400ex]

Originally posted by brewster426
Those clamps will work. I know it looks janky but I have those on my bike. I had a pretty bad wreck and it broke the stem, didn't do anything to the adapters.

any pics and what bars are you running?

[capecod400ex]

looking for this. anyone knew who makes this

http://www.ebay.com/itm/AFTERMARKET-HANDLEBAR-CLAMP-MOUNT-04-09-2005-HONDA-TRX450R-TRX450-TRX-450R-/330686333443?pt=Motors_ATV_Parts_Accessories&vxp=mtr&hash=item4cfe710203

[TWILES]

I just bought the Moose 50mm 7/8 to 1 1/8 riser/adapters and a set of Eastoon CR high bend bars and I don't think they look junky at all. 50mm is the difference between stock 450r bars and CR high bars and the bike bars are around 1'' forward compared to the stock bars. I couldn't be happier. I got the bars on clearance from motosport and the risers from Dennis Kirk. I think I was out $120. Less than Half what a stem alone costs.

[capecod400ex]

this should do it. Anyone have this

http://www.modquad.com/catalog/product_info.php?cPath=783&products_id=1399

[brewster426]

I'll text you pictures. What's your number

[chronicsmoke]

I had the 'Tusk' risers and wreched HARD.. snapped the stem below the mount but didn't bend the risers at all.. I got mine PC's black and they looked sick on a Yellow stem

[capecod400ex]

http://www.ebay.com/itm/170691975561?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I ended up buying this

[X-tech]

Teixeira Tech has these. You can buy these for your stock stem and then when you buy an anti-vibe stem, they will work in there too. These will give you +1 height on a stock stem. No need to buy 2 different clamps.

http://www.teixeiratech.com/proddetail.asp?prod=BarClamps

[capecod400ex]

heres the set up I ended up with, I moved the key and over heat light. removed the "blob" off the bars and put ASV hot start and clutch lever. TAG riser

http://i43.photobucket.com/albums/e398/bryrylan/Brewster-20120317-00137.jpg

http://i43.photobucket.com/albums/e398/bryrylan/Brewster-20120317-00139.jpg

http://i43.photobucket.com/albums/e398/bryrylan/Brewster-20120317-00138.jpg