K-Dub
02-23-2012, 07:22 AM
http://www.facebook.com/photo.php?fbid=375909159104443&set=a.330929406935752.92019.100000560877270&type=1&theater
http://www.facebook.com/photo.php?fbid=375908832437809&set=a.330929406935752.92019.100000560877270&type=1&theater
http://www.facebook.com/photo.php?fbid=375909495771076&set=a.330929406935752.92019.100000560877270&type=1&theater
Stock frame has decent powder to my knowledge no cracks
Roll design +3 400EX a arms with spacers to adjust wheel base and caster, bottom hiems less than 10hrs powder worn off bottom sides
JB racing SR swing arm with oem link age
JB racing +1 steering stem
LSR axecaliber axle
Baldwin or LSR lock nut
400EX spindles and front brakes steel braided lines, have extra set of 400EX spindles and the stock spindles and brakes/master cylinder
Baldwin carrier with less than 10 hrs on new bearings from Baldwin
AC pro peg nerf bars
Denton stick type stabilizer feels like it has some air in it
stock air box with 86 intake
Custom Axis shocks comp/rebound adj
Douglas wheels rear single bead front rolled lip
2/3 tread on Holeshot tires
Renthal bars
Frame skid plate
OMF rad shrouds
OMF seat latch
stock 88 cylinder mid to mid top porting by Niel CR head gasket needs race gas less than 10hrs
Duncan racing pyramid reed cage, mid range pipe/ silencer
36mm air stryker
Hinson works basket with works fibers and stock steels less than 10 hrs
Stock ignition
300EX thumb throttle
Temp gauge and cooling tube
14/38 gearing engine pulls strong, what I have ran it was with 15/38
$4500 Will consider trades for 08 or newer 450R kick start. (not ER with kick start added)
Duncan racing Eliminator pipe chrome for an extra $100 (not for sale separately)
Built this to race but before I could, I found my LOBO. Haven't rode this since, except to warm it up once in awhile. Located in Jerusalem Ohio
http://www.facebook.com/photo.php?fbid=375908832437809&set=a.330929406935752.92019.100000560877270&type=1&theater
http://www.facebook.com/photo.php?fbid=375909495771076&set=a.330929406935752.92019.100000560877270&type=1&theater
Stock frame has decent powder to my knowledge no cracks
Roll design +3 400EX a arms with spacers to adjust wheel base and caster, bottom hiems less than 10hrs powder worn off bottom sides
JB racing SR swing arm with oem link age
JB racing +1 steering stem
LSR axecaliber axle
Baldwin or LSR lock nut
400EX spindles and front brakes steel braided lines, have extra set of 400EX spindles and the stock spindles and brakes/master cylinder
Baldwin carrier with less than 10 hrs on new bearings from Baldwin
AC pro peg nerf bars
Denton stick type stabilizer feels like it has some air in it
stock air box with 86 intake
Custom Axis shocks comp/rebound adj
Douglas wheels rear single bead front rolled lip
2/3 tread on Holeshot tires
Renthal bars
Frame skid plate
OMF rad shrouds
OMF seat latch
stock 88 cylinder mid to mid top porting by Niel CR head gasket needs race gas less than 10hrs
Duncan racing pyramid reed cage, mid range pipe/ silencer
36mm air stryker
Hinson works basket with works fibers and stock steels less than 10 hrs
Stock ignition
300EX thumb throttle
Temp gauge and cooling tube
14/38 gearing engine pulls strong, what I have ran it was with 15/38
$4500 Will consider trades for 08 or newer 450R kick start. (not ER with kick start added)
Duncan racing Eliminator pipe chrome for an extra $100 (not for sale separately)
Built this to race but before I could, I found my LOBO. Haven't rode this since, except to warm it up once in awhile. Located in Jerusalem Ohio