PDA

View Full Version : rev limiter question



russellsroost31
02-22-2012, 06:33 PM
can you run a 400ex with out the rev limiter
im asking this because my buddy has a trx450r with a high proformance motor puttin out 51hp said he doesnt even have a rev limiter on it so i was wonderin if it is possible to run a 400ex with out the rev limiter

Scro
02-22-2012, 06:38 PM
I'm sure it's possible, but you're not going to gain any power. Once 4 strokes reach a certain RPM, the power starts to fall drastically. At that point, you're doing nothing but putting extra wear and tear on the valvetrain. On a 400ex, unless you've done extensive motor work, the stock rev limiter is more than enough.

ish416
02-22-2012, 08:36 PM
Your buddy is a tard if he is somehow running no rev limiter.

You should inform him that his quad will still make 51hp with a rev limiter and he will know when to shift instead of floating his valves.

01boneless
02-22-2012, 09:47 PM
i dont think there is even a way to "have no rev limeter" if there is its realy a dumb mod... ^^ as stated above u will send a valve thro the piston. they have a rev box that raises the revlimet up like 1000 more rpms but does not help on a stock quad at all. my 450r is estimated at 53-55 hp and theres no way i would mess with the rev box,i dont care for the rasied limet i think stock placement is perfect.

russellsroost31
02-23-2012, 06:36 AM
look guys all i know is dat when i raced his quad it was a rocket
he built it as a pro level bike

TheAwesomehonda
02-23-2012, 08:03 AM
My question is how can the rev limiter be removed from a quad? isn't it just in the icm

CJM
02-23-2012, 08:42 AM
Well if its all built he will blow the doors off your EX, just the nature of the beast. Your machine unless you stroke and bore it will never truly match his. With all my mods mine will not beat one in a drag unless they are a bad rider. Where I shine is the woods where it handles better.

There is no way he has no limiter, either he cut the green wire (06+ 450r) or has an aftermarket cdi which both would raise the limit by 1000rpm.

If he had cdi the bike wouldnt start lol.

russellsroost31
02-23-2012, 09:27 AM
i think he cut the geen wire cause he said he cut some kind of wire on the rev limiter

01boneless
02-23-2012, 11:33 AM
^ that would eb the green wire. it adds 1000rpm

CJM
02-23-2012, 12:27 PM
Originally posted by 01boneless
^ that would eb the green wire. it adds 1000rpm

bingo. your friend still has a rev limiter, its just higher.

JOHNDOE83
02-23-2012, 01:31 PM
Originally posted by russellsroost31
look guys all i know is dat when i raced his quad it was a rocket
he built it as a pro level bike

well that explains it :blah:


Originally posted by CJM


If he had no cdi the bike wouldnt start lol.

Exactly!