brandonw
02-13-2012, 06:10 PM
I am located in Goldsboro, NC
Would take $3500 for complete bike which is a good deal in my eyes
Alright guys i am parting out my mx bike. the arens frame still has original powder on it. Bike was built about 10 years ago and sat on a stand for 8 years in my buddies garage without being ran. the propeg frame has maybe 25 hours on it along with the nerfbars. my buddy raced this bike in ONE weekend national, broke his leg and bike sat until i got it. you can look at the nerfbars cleets and see how much time is on the setup. the swingarm is a laegers or houser im not sure but one of you can tell me once i get the bike taken apart, detailed and detailed pics. im going to put some general pics since the bike is still together so that anybody can claim what they want before the bike is broken down. the shocks were setup by legacy for 120lbs A rider and feel great, no leaks and i filled them with fresh nitrogen. the rear shock still looks almost brand new, the fronts need to be detailed and coated simply becaues they had covers on them. motor is a very fast ported 250 but comp is getting low, would replace piston or at least new rings, will know more when take it apart. i will have it honed before going out but is on original bore. anything that is not listed that any of you might want or need is up for grabs. this is gonna be my basic pre break down post. thanks for looking. Shane
Pics were taken at dark and dont do justice. bike was still a little dirty just wanted to go ahead and get some up
READ PARAGRAPH!!!
Arens frame with AC propeg: 1000
Lonestar chrome stock length steering stem with nice billet arfsx fat clamp: 200
Laegers? swingarm tm chain guide: 350
Low hour ASR A-Arms, tierods: 250
Lonestar axle, bearing carrier: 150
Works front shocks: 300
Works rear shock: 300
Flexx bars: 225
AC front bumper and grab bar: 75
Maier blue race cut fronts, rear, seat, new nacs graphics and seat cover, tank cover, omf seat latch extra new seat cover: 400
Bills mx pipe: 250
hotrods crank, la sleeve sbss cylinder, complete topend, reed cage, carb boot, ex flange, head, dome, piston: 500
Beadlock mx rear wheels with good condition scorpion tires with nacs wheels caps, 8in: 300
trx450r front brake setup, +2 steel braided, 250r calipers all in perfect working condition: 150
red tank with good valve: 40
rear brake system works great: 80
clutch and stator side cover: 100
anything else someone might want is fair game. stock electronics work great but pickup has play.
pics will be up in a few minutes
Would take $3500 for complete bike which is a good deal in my eyes
Alright guys i am parting out my mx bike. the arens frame still has original powder on it. Bike was built about 10 years ago and sat on a stand for 8 years in my buddies garage without being ran. the propeg frame has maybe 25 hours on it along with the nerfbars. my buddy raced this bike in ONE weekend national, broke his leg and bike sat until i got it. you can look at the nerfbars cleets and see how much time is on the setup. the swingarm is a laegers or houser im not sure but one of you can tell me once i get the bike taken apart, detailed and detailed pics. im going to put some general pics since the bike is still together so that anybody can claim what they want before the bike is broken down. the shocks were setup by legacy for 120lbs A rider and feel great, no leaks and i filled them with fresh nitrogen. the rear shock still looks almost brand new, the fronts need to be detailed and coated simply becaues they had covers on them. motor is a very fast ported 250 but comp is getting low, would replace piston or at least new rings, will know more when take it apart. i will have it honed before going out but is on original bore. anything that is not listed that any of you might want or need is up for grabs. this is gonna be my basic pre break down post. thanks for looking. Shane
Pics were taken at dark and dont do justice. bike was still a little dirty just wanted to go ahead and get some up
READ PARAGRAPH!!!
Arens frame with AC propeg: 1000
Lonestar chrome stock length steering stem with nice billet arfsx fat clamp: 200
Laegers? swingarm tm chain guide: 350
Low hour ASR A-Arms, tierods: 250
Lonestar axle, bearing carrier: 150
Works front shocks: 300
Works rear shock: 300
Flexx bars: 225
AC front bumper and grab bar: 75
Maier blue race cut fronts, rear, seat, new nacs graphics and seat cover, tank cover, omf seat latch extra new seat cover: 400
Bills mx pipe: 250
hotrods crank, la sleeve sbss cylinder, complete topend, reed cage, carb boot, ex flange, head, dome, piston: 500
Beadlock mx rear wheels with good condition scorpion tires with nacs wheels caps, 8in: 300
trx450r front brake setup, +2 steel braided, 250r calipers all in perfect working condition: 150
red tank with good valve: 40
rear brake system works great: 80
clutch and stator side cover: 100
anything else someone might want is fair game. stock electronics work great but pickup has play.
pics will be up in a few minutes