Installing yz 85 in polaris predator frame need help

[dadofethan47]

I have a yz 85 shifter motor and going to intall it on polaris predator frame. the frame has been done by rath with all the gussets. My biggest concern is the swing arm the sprocket is on the wrong side. Is everyone custom making swing arms? or just flipping the carrier? I have been pondering a jackshaft. The only down fall is more rotating mass and 2 chains. what are your guys thoughts. any help would be great. thanks

[devenport]

you should contact "Logan #34's Dad" he did a
CanAm with a ktm 85. he had to flip swing arm over. also pics under hybrid section

[dadofethan47]

Originally posted by devenport
you should contact "Logan #34's Dad" he did a
CanAm with a ktm 85. he had to flip swing arm over. also pics under hybrid section

Thanks I will check it out

[Logan #34's Dad]

You all just need to leave me alone.............just kidding. I replied to this post in another sub-section.
And for the record, the flip on the CanAm was very simple.
Depending on how deep your pockets are, Guyer44x on here who is selling his DRR cvt ALSO has a dual a-arm DRR with after market suspension with a CR85 engine already installed for a real great price.......Race ready.
Here's a link..... could easily put a kx85 or your yz in it....imo
http://akroncanton.craigslist.org/rvs/2793057777.html