schuckie0920
01-23-2012, 07:09 PM
i have an 85 atc 250r motor with an 88 trx250r top end bottom and is stock atc with short rod crank that i was going to put in a 450r frame but decided to sell to finish building my 250r.this motor has very low hours.i just tore it completely apart inspected the crank,trans,and top end.the crank is original and in perfect shape,the trans is good,the cylinder is still on the stock bore and can still make out some of the cross hatch marks.i just replaced all gaskets,seals,and installed a new oem piston kit.motor will come with an 88 trx 250r stator,intake,reed cage with boyseen carbon fiber reeds,and flywheel.the exhaust flange is included the cases are near perfect with only a chip out of the front left case (that i had professionally welded ) at the motor mount (still bolted up fine) the case saver area has never been cracked if any one has any questions i can be reached at 410-292-5834
will sell complete for $700 shipped also willing to seperate and sell just the bottom end
pics will be posting shortly
will sell complete for $700 shipped also willing to seperate and sell just the bottom end
pics will be posting shortly