getting rid of start/light switch 05 450r

[ride red 14]

wanting to put a clutch perch with hotstart on and get rid of the start switch on my 05 kicker. what are you guys using? thinking of a crf 450 perch with hotstart, but wondering if the trx 450r hotstart cable will still work. or if i need the crf hotstart cable. dont want to spend $150 on an expensive setup.

[Baileygunns]

Any lever with a hotstart will work and the ASV hotstart cable will work. The stock cable can be made to work with some creative shim work... I suggest dropping the 15 or so dollars on the ASV cable.

[Baileygunns]

And... I used an MSR perch with hotstart that worked well and wasn't to expensive. I like the ASV lever I have now better but obviously more expensive.

[ride red 14]

i thought any perch would work, so ASV cable for the 450r is the cable to use, no matter what perch i use. i was kind of leaning towards the moose perch for the money, just didnt know what cable to get.

[Baileygunns]

Any perch with hotstart will work (I said lever in the first post). I know for sure the ASV cable works with the MSR and ASV hotstart. I'm pretty confedent that it will work with the moose perch too but I have never uses that one so I can't say for sure. The problem with the stock cable is the black casing is to short for the aftermarket hotstarts. You end up with too much slack in the cable.

[K-Dub]

Will the ASV cable work for the CRF prech and lever?

[Baileygunns]

I beleive the ASV cable is the same as he CRF cable except for the end on the carb so I would assume yes. The cable has an adjustment in the casing unlike the stock TRX one. Shoot ASV an email and ask so you know for sure.

[K-Dub]

Will do thanks.