Walsh EZ link chain length

[4bidden]

Can someone who runs the Walsh EZ link rear end tell me how long of a chain they use? Thanks!

[stutzmanracing]

i can check when i get home this afternoon, ill let you know

[4bidden]

Perfect, thanks.

Since you have their front end also, any idea how many full turns out you are on the heims? I've almost got mine where it needs to be but seems like the fronts are really far out and the rears barely out to be there.

[stutzmanracing]

i counted 48 links on the chain. And on the heims my fronts are also out pretty far and the backs arent out much. its like that on both my bikes with the same setup, seems to handle best that way. Hope this helped!

[4bidden]

Wow... That's the stock chain length for 06+. Surprised it didn't take an extra link due to the extra .5"

[DnB_racing]

the +06 has 48 of each inner and outer half links.... but when ordering make sure you order 96 links

[jkiserracing]

Im not at home to count mine now, but my stock chain did not work when I put on my Walsh swinger...I have the ez link as well. Ill try to check when I get home. But if I were you I would order a longer chan by a couple links (if thats what your doing)

[4bidden]

I got a 100 so I'm safe either way, I was just curious how people were getting away with 96 (stock) on a +.5" swinger. I ended up with 98 and it fits just right. Enough room for a bigger sprocket if needed and plenty of adjustment.

[fastredrider44]

All of my aftermarket swingers have all required a 98 link chain with stock size sprockets, but I've never had a Walsh. I always order the 100 link too.