kicker and extentions

[chopp124]

so i started to mess with making crf shorty kickers i make them for yz/yfz but wanted to try these as well. i also am making extentions.

[chopp124]

ext pic

[JOHNDOE83]

I was just wondering why noone makes a actual kicker extension.

I was thinking about it and thought about what it should look like and here you are with almost the exact same thing!

[250x_kyle]

there were a few companys that made them but they are pricey and look the exact same as these. chopt sorry things got hectick at work and i havent got a chance to do much of anything let alone call you about the extention

[chopp124]

i dont even remeber u asking but its cool the only guy that irritated me was the 03yz to yz one i did. its completely useless to anybody but him. it has the tiny shafts. but oh well

[chopp124]

a couple places still do them. im thinking of doing a make your own post with pics its easy to do. i use the 2 premade bushings. press the shaft into one then then weld the nuckle to it then press the outter shaft u see over both then weld on both sides. hardest part is cutting the nuckle but you dont need a lathe just a grinder. just dont go crazy with the grinder. you can get the nuckle for $38 bucks newhowever there were many year kickers that used the nuckle. i buy the kickers for $20-25 shipped on ebay. a kick gear with shaft for around $25 on ebay and i will sell the bushings for like $15 shipped

[250x_kyle]

well i have acess to a cnc shop for another week and a half. if i get a few free minutes i may take advantage of it and turn my knuckle down or at least machine the boss off the crf knuckle i have. you were going to explaine how you did it to me over the phone.

[chopp124]

i didnt use a cnc or a lathe. i use a grinder and had these couplings. take your time with a grinder it works fine. after u press one of the sleves over it you can see it anyway

[250x_kyle]

i know im a little bit of a perfectionist at this point. my other question is since your using the yz bike shaft how are you going about running the bolt threw to tighten it to the motor . is there already a hole threw the entire shaft the correct size. its been a while since i had kicker gears apart i dont remember wether or not they have a hole threw the entire shaft for if they were tapped the depth of the splines and then solid after that.

[chopp124]

shaft is hollow then taped drill it with good bit and oil goes right through I have a yz shaft and the collars if u want them also u can get a nuckle from a used kicker real cheap

[250x_kyle]

have both knuckles kept my old hybrid and yfz kickers laying around.

[unplayedcard]

hey chopp, I am in need of one of your yfz shorty kickers. I was gonna pm you on yfzcentral but then I remembered you do a lot for hybrids and figured this would be just as good. thanks:D

[chopp124]

i only have one right now and am waiting on paypal money for it. i can look tonight and try to find one on ebay to bend up. there getting a good chunk of money for them so i dont know how cheap i can do it for.

[chopp124]

i can get a stock one on ebay to bend for $63 so $20 for me to bend it and $5 to ship back to u. $88 total sound good?

[unplayedcard]

sounds good. whats your email?

[chopp124]

sent a pm