fox float

[05/450r/10]

one of my valve stems is leaking somehow what do i doooooo

[eastside 400]

check to make sure the valve itself is tight, think its a 10mm. Then make sure the core is tight, or just put a new core in, should be the same as a tire stem core. spray soapy water around it to figure out where its coming from

[04450r]

I have had the o-ring that goes between the shrader valve assembly and chamber(below the above mentioned 10mm),o-ring was split in half..Sometimes that valve assembly loosens if the pump is screwed on too tight causing the o-ring to tear.Simple fix hopefully!