02 Walsh part out

[woodsracer144]

02 walsh narrow frame CR500 link pep rear shock and axis fronts about 7or 8 sets of plastic go with it and a bunch of parts. quad has the top end off it at the moment cause I was getting it ready for Ice racing but I'm looking to put the money else where cause I'm planning on moving.

I didnt mean to post it as a part out I want to sell it all at once... and be done.

[woodsracer144]

best to call or text dont have much free time I get up at 6am and go to be about midnight and I'm at school or work the whole time.

(715)9331083 call for details. want it all gone.

lot of parts that go with it, I'm getting rid of everything.

02 walsh narrow frame cr swinger link and stem- 2800 and i'll pay for it to be PC'd any basic color.
prp +2 a-arms 500
pep rear 300
axis fronts 450
LSR 100
X33 75
oe axels 75
OEM hubs and spindles 150
400ex hubs spinindles 125 need studs.
PRM or RPM hubs 200
AC bumper 25
hyper rims with kenda rear tires (NEW) and holeshot fronts SOLD!!!
Sparks pipe 250 chrome is nice just has one repaire
2 LRD team B pipes 150 a pipe. one is bare and one is chrome'd
AC nerfs 125
loads of plastic
LSR stem 100
Sparks 330 cylinder(needs sleeve) 300
FTZcr250 ported cylinder(need a nik job) 250
OE 250r cyl ( broke water spickit near reed cage still works) 125
extra set of cases 300 have some repairs
Lectron 40mm with billet bowl 300
35mm PWK 125
hinson break pedal 120
RTC front break lever with SS lines and front calipers- 150
fasst flex bars 250
rental fat bars 40
tag ATV High fat bars 40
Grooved car tires 2 sets with rims, one set like new one are fair make offer
9 in bead locks with razr like tires. ITP rims 250
trans parts make offer
Denton stablizer 50
PEP stick stablizer 50
Walsh raid and shrouds 350
billet throttle 50

I also have a 400ex motor that needs a piston 450 split shipping in US
2 cannondale frames make offer
KTM300 motor that needs a crank and top 450 split shipping
Cannondale a-arms and spindles
stems make offer


I have alot of extra parts.

I dont have free time so I would like all the 250r stuff to go at once and sell the extra 400ex cannondal ktm stuff on the side

I was planning on putting a 400ex motor in one cannondal chassis and the KTM in the other.

Thanks.

I decided to part it out.
I know its been kind of foggy but I didnt really know what I wanted to do cause I really don't want to sell it but I'd like a newer powerstroke and this has to go in order to pay for it in cash. willing to make deals on stuff if you take it in bulk.


If you have been texting me im sorry I havnt replied i cant send text with my phone at the moment. It will be taken care of tonight.

[jwags13]

Can u send more pics to, jaywagner13@gmail.com. I am interested in the itp beadlocks, hinson brake pedal, rpm hubs, a set of front and rear fenders, rtc front brake lever. Thanks!!

[woodsracer144]

wont be able to get pics till later on in the week. Its going to be slow cause I'm so busy.

no calling dibs. first one to pay for things will get it. IE walsh radiator

Mods and everyone else I'm working on a price list

[croat1]

whats the deal??? first you say the bike and parts...lots of parts to go with it...then you list the parts. seems like you want one person to purchase the lot.

then the guy asks about a few parts and you are working on a price list?

it might just be me but i'm a little confused about your post.

[woodsracer144]

my phone has also started to act up... I dont know what the deal is with it, I know some one just text me but it wont let me type I'm going to have it all straightened out tomorrow.

sorry about that.

[woodsracer144]

Originally posted by croat1
whats the deal??? first you say the bike and parts...lots of parts to go with it...then you list the parts. seems like you want one person to purchase the lot.

then the guy asks about a few parts and you are working on a price list?

it might just be me but i'm a little confused about your post.

when I started the topic "02 walsh Part out" came up and I didn't mean for it to get posted like that.

I listed all the parts that I can think of off the top of my head, If I have guys that want most the stuff right off the bat I'll part it other wise I want it all going to one home. I'm trying to figure out a fair price. and get some pics. Its kinda hard now cause Its cold and snowing everyday at the moment.

[woodsracer144]

I'm working on a price off all the parts I have so far I have a page and a half of parts adding to 10.700 and I know on a full quad it's not worth it. I've also only have the parts I can think of off the top of my head so tues. I'll be able to get in the shop and get a full list of everything and let you all know a price.

[danhung11]

Originally posted by croat1
whats the deal??? first you say the bike and parts...lots of parts to go with it...then you list the parts. seems like you want one person to purchase the lot.

then the guy asks about a few parts and you are working on a price list?

it might just be me but i'm a little confused about your post.

Same here Joe, I'm a little confused myself. Right when this was posted I saw a $5800 price tag for the whole lot, minus the 400EX and Cannondale stuff. Then it jumps up to $10,700 for part out but you want to sell it all at once. Interesting.

Keep in mind, everyone is busy in life. It's all in how you manage your life. These part out threads draw a lot of attention, especially how you typed it up. if you arent ready to devote time to the idea of parting the bike, delete the thread. Simple enough.

[dabeechman]

Completely agree with Dan. While you say you don't have the time to manage this classified, you are simultaneously wasting ours as we try to figure out what your intentions are.

Plus it comes off as you being sketchy. It doesn't make us (or at least me) confident that will have the time to ship us our parts when you apparently don't have the time to type out a simple lot price or price list...

[woodsracer144]

Originally posted by dabeechman
Completely agree with Dan. While you say you don't have the time to manage this classified, you are simultaneously wasting ours as we try to figure out what your intentions are.

Plus it comes off as you being sketchy. It doesn't make us (or at least me) confident that will have the time to ship us our parts when you apparently don't have the time to type out a simple lot price or price list...

I'm sorry I'm wasting your time then.... I wake up go to school at 6 am. get done there and go to work at 3. I have a little time before and after school to get on here I have tues and thurs nights off... being I dont have alot of time to part everything thats why I wanted to sell it all at one shot.

I have a few guys that are texting me but I have to get my phone fixxed. ( will be taking care of that at about 9am today)

I'm not here to waste your time or my time. I'm working my tail off and I'd like to just trying to sell everything and get out of the sport to have a little bit of the money I've spent in it.

[yamahopper]

sent you a message on your phone name is luke let me know if it worked.

[woodsracer144]

Originally posted by yamahopper
sent you a message on your phone name is luke let me know if it worked.

I got your text but I cant reply back, I was also at work. I guess they cant just give me a different phone at the store... they have to mail me one... so I'm supposed to have a new one in the mail tomorrow.

[jwags13]

Any progress on those pics?

[woodsracer144]

what do you want pics of I'm sorry I missed you post.

It would be some time this weekend.

[Arsene Racing]

What is the Sparks pipes ?? mx or tt ??

[woodsracer144]

MX

[jwags13]

The itp beadlocks with tires.

[jwags13]

Pics of the itp beadlocks, lsr stem, and hinson brake. Also pics of plastic if you can. Send pics to jaywagner13@gmail.com or call or text at 814-515-5222 when u get free time. Thanks

[woodsracer144]

i'll have a bunch of pics up tonight

[racermike311]

Interested in the fenders, what colors do you have?

Thanks mike

[woodsracer144]

orange 2 pc set and 1pc blue ( 3 fronts fullbore one NEW one rear full bore one rear maier) red full bore set white maier blue and black maier. red oem race cuts with QT hood.

[jamieg45]

Do you still have the walsh radiator and how much do you want for the white fullbore plastic front and rear. If you would send me pics at Jamieg4558@yahoo.com, More interested in the radiator and what the shipping would be to 49120.

[woodsracer144]

dont have white full bores and im Ice racing it now and going for points so I dont want to sell the rad unless some one is going to take the chassis or some of the main parts cause I cant race then

[jamieg45]

Ok thanks man apprciate you getting back quickly.