gojk
11-27-2011, 06:12 PM
Help me decide what I should do. First off, this is what I have.
Uni air filter, 38AS carb, PT Eliminator pipe with powercore 2 stinger.
Now to the options. Should I
1. Send stock cylinder to Neil and have him port it, buy esr trx5 centermount pipe and silencer with new reeds and cage and maybe a CR ignition.
2. Buy ESR 330 PV kit and utilize existing parts.
3. Other, list what you would do. I am trying to keep the cost below $1500, the cheaper the better, but I don't want to cut corners and be disappointed or have problems.
I have the engine torn down now and will be replacing the main bearings and the clutch while it is apart.
Uni air filter, 38AS carb, PT Eliminator pipe with powercore 2 stinger.
Now to the options. Should I
1. Send stock cylinder to Neil and have him port it, buy esr trx5 centermount pipe and silencer with new reeds and cage and maybe a CR ignition.
2. Buy ESR 330 PV kit and utilize existing parts.
3. Other, list what you would do. I am trying to keep the cost below $1500, the cheaper the better, but I don't want to cut corners and be disappointed or have problems.
I have the engine torn down now and will be replacing the main bearings and the clutch while it is apart.