Durablue EZ fit wheel spacers

[TREX123]

Thinking of widening the front and back with Durablue EZ fit wheel spacers....Don't do a lot of jumps and ride all sorts of trails. What would be a good set for the front and back? 1 1/2 ? 2 ? 2 1/2 ?

[SYKO]

wouldnt go over 1 1/2 front and the 2 in the back if fine, many just flip the front wheels for the extra width you can do some looking and you will see alot here on that subject. I also sugest looking at rear hubs instead of spacers like the G-force hubs for a 400ex will work and thats alot stonger then a spacer. Ive never been a fan of the durablue spacers I much prefer the billet type if running them. Also keep an eye out for used spacers on here or ebay since hondas been the same pattern for so many years there are alot of spacers out there.

[TREX123]

Appreciate your help. Would a stock 400ex hub widen me out at all or am I looking for extended G-Force hubs? Any difference between the front hubs and rear hubs on the 400ex?

Thanks Again!

[SYKO]

No difference in stock400 stuff need the extended gforce hubs

[TREX123]

SYKO - So are you sure that the G-Force extended hubs from the 400ex will fit on the trx250ex? All Splines match up and everything? I need no other additional parts? How about screws? This is really the way I want to go. Id rather not use spacers. Let me know asap so I can get to ordering some.

Thanks!