Recommended Fuel Screw Setting for 40 pilot jet

[wheelman]

Guys,

Just changed out my pilot from a 38 to a 40 like the forum recommends with the hopes of improving some of my cold start woes. Anyway, what is the recommended starting point for the fuel screw on the carb with this new setup? I know its about 2 turns stock but its not running that great set like that now. I'm down here in texas and its about 70ish degrees during the day at the moment.

Thanks in advance

[Ridiculous]

2.25 turns out is the factory setting.

2.5 turns out is what majority of people run.

good way to tell is, if it pops and backfires when downshifting you need to turn it out more...


and a 42 is what is recommended...