LT500 Front Shocks

[BCTRX]

Anyone know of any other make or model oem or aftermarket front shocks that will fit a Quadzilla? They appear to be loger than Banshee but shorter than my 250R But i havent done any measuring yet. Lots of aftermarket shocks on ebay but not for Zillas. Looking for some ideas instead of new Elkas.

Thanks in advance

[CSR400EX]

i found some from race tech, but they do get pricey. also heard pep makes some for the zilla.

[headache]

i think the quadzilla shocks are 15.5" long stock. the raptor 660 shocks are 15.75" long which is what i run on the front of my 87lt250r with +2 a arms. so they should work just fine on a zilla

[ERBE]

The OEM length is 14.375" eyelet to eyelet, a good aftermarket used shock is the Works Performance shock of a Banshee they are 14.500" eyelet to eyelet, some small mods to the bushing to have them fit.
These shocks by no means are not valved are set up with the right springs, but if you get a set cheap enough you can order the valving and springs from Works, I picked up a set for 150 bucks, and had the springs from other builds.
Banshee Shocks on LT500
http://www.suzukiquadracerhq.com
http://i192.photobucket.com/albums/z183/erbe03/100_0796.jpg