Truckload of 400ex parts for sale cheap

[f4istunna]

I have a cpl boxes of 400ex parts i dont need. located near youngstown ohio if your close and want to pick anything up. OTherwise paypal or money order. Prices are + shipping if needed. Ill ship by next day after you pay. If you buy a few things ill make you a good deal.


LIST IS UPDATED 3-28-13 with whats left

Rubber carb-head insulator / intake boot 5
stock side panels/gas tank plastic 10
headlight, works has cpl screws through the plastic comes with bulbs/wiring 10

stock exhaust header and muffler (muffler missing end cap/baffle) header has heatsheild 20
Stock header with heatsheild $10
rear shock with linkage good bushings 20

Cpl front sprockets i think one is 14 other is 15 with chain 10
Front sprocket cover 5
stock front bumper 5
front master cylinder with lever and perch 20
front master cylinder lever and perch 20
3 front brake calipers 10 ea

pair of footpegs 5

rear brake master cylinder with lever and reserviour 20
rear brake master cylinder lever and resi 20

Stock clutch perch / lever (lever bent) with cable 5
Good throttle cable 5
Front fender brackets and rear bracket (goes under seat) 10 for all

these parts id take a cpl bucks each for or id give you free if you get something else.

Rear brake caliper bracket/stay
Rear brake caliper bracket/stay
Brake caliper stay snap ring
shifter lever
battery box (no strap just box)

Clutch rod
Clutch actuator lever
top engine mount (bolt and spacers)
crankcase breather tube/box
Spark plug boot no wire or coil just boot
misc brackets / cable an line holders
black plastic carb cover on side where throttle cable goes

[SYKO]

You got a rear carrier?

[riotact]

I'll take the head pm sent :D

[f4istunna]

I know i have a cpl 450r spare carriers im not 100% sure if they are the same or not though. I dont have anymore out of a 400ex that i remember ill take a look though.

[96tacoma]

Do you have an intake boot on airbox side

[f4istunna]

no i dont think so, ill take another look but im pretty sure i listed it all.

[CJM]

Steering stem, hopefully not bent?

[f4istunna]

no stem sorry bud

i only have whats listed above guys thats all my 400ex stuff im willing to sell

[96tacoma]

I'll take two intake boots engine side pm or text 706-260-0376 thanks

[Thumpin440ex]

Pics and price for both header pipes shipped to 21219.. I got a idea for some duals :D

mangler0075@aol.com


Thanks John

[f4istunna]

headers just sold about an hour ago sorry man.



Both headers, both sets footpegs, and stock front shocks Sold

[Thumpin440ex]

Originally posted by f4istunna
headers just sold about an hour ago sorry man.



Both headers, both sets footpegs, and stock front shocks Sold


F$%&*^ ;sigh:

Aight man thanks anyway


John

[937ampd1]

Pm'd for bottom end.

[4strokernow]

EDIT---Price for both seats and tail light to 19053

[f4istunna]

you can have it all for $30 plus shipping id have to find a box and get some measurements before i got an accurate quote since its gonna be a good size package. id guess around $30 to ship

[jfarrar30]

Got a carb?

[f4istunna]

i have a fcr from a 07 450r id take $200 shipped

[jfarrar30]

What size is it

[f4istunna]

they are 40mm fcr i beleive

[nooch55]

have you allready sold the head in really bad need of one appreciate the help

[f4istunna]

head is spoken for ill let you know if the guy doesnt send payment soon.

[f4istunna]

Cylinder head, all 3 carb boots, both sets of footpegs, both stock headers and front shocks are sold.

Still have all the rest listed on pg 1

[f4istunna]

sale pending on bottom end.

[f4istunna]

updated list



Stock cam minor wear $10
Frame straight and solid $50
2 subframes $20 each
gas tank with cap and petcock $10

Stock swingarm Could use painted. $50
3 pairs of spindles $30 a set (left and right)
2 clutch covers $10 each
Front brake calipers with stock lines $30
Stock clutch lever/perch assembly with cable $10
2 Gas tank heat sheilds $3
Battery box and strap $5
Front brake master cylinder with lines (no lever) $20
Starter motor good $20
2 rear brake caliper stays / brackets $5 each
Tail light good lens w/ bulb and hangers (one tab plastic welded on, been like that for years, holds great.). $15
rear brake master cylinder with lever, resi, and lines (everything but caliper) $25

2 Complete engine mount set $5 per set
2 stock axle locknuts $5 each
full set of clutch plates and springs $10 (used but good)

2 Swingarm pivot bolts $10 each
Thumb throttle/lever $20
Front sprocket cover $5


Oil tank with cooler and lines $30
Complete oem clutch assembly basket, hub, pressure plate and plates good shape $50
stock rear shock $30

stator with cover good $50

2 starter solenoids $10each
oil tank and cooler (jb weld near drain) $10
Stock shock linkage $5
Stator good $40
stator cover $10
front and rear sprockets stock size $10 per set (both front and rear)
Cam chain tensioner $10
2 seats needing new cover good pan and foam with latch $10 each
Stock front wheels with 1/4 tread tires wheels have some dings but serve the purpose $30
misc hardware--- 2 or 3 shifters, subframe 2rubber grommets, fender mounts, brackets, plastic rotor guards, gas tank petcock, 2 steering stem clamps etc... all for $20

[dc01]

How much for a seat with good pan and foam shipped to 47170? Thanks.

[f4istunna]

probably $25 shipped maybe $30 at most .

[f4istunna]

Bottom end and one pair of the spindles are sold

[f4istunna]

flywheel/starter clutch is sold. List above is updated

[f4istunna]

make offers...

[haley317]

How much for frame and subframe shipped to 62703? Email me at wicked317@hotmail.com.
Thank you
Paul

[f4istunna]

frame is sold i only have the subframe left. $20 plus shipping

[dman400ex]

interested in stator and cover text 205-246-4009

[f4istunna]

its sold sorry. I didnt get another 400ex a cpl weeks ago but im not sure yet if im going to be using for parts or fixing this one up

[laxman1306]

is the rear swinger still for sale? and do you happen to have a rear axle?
text 6169806524

[f4istunna]

updated the list with what i have left as of 3-27-13

[Tuaca]

pm sent

[odog]

front and rear plastics are needed if you have any pm me a price

[Zhutch7]

Can I see pics of stock side panels and gas tank plastic? 479-595-2729 or PM please.

[f4istunna]

ya let me go get some pics of them and i can email them, just pm me with email address.

odog dont have plastics just whats on list on page 1

[Zhutch7]

PMed

[wickestangwv]

Front master cylinder perch and lever? Does it need rebuilt? If not PM me your pay pal address plus what shipping cost is and i'll take it. I'm ready to pay 10 min after I get that info.

[cheater13]

If you still have the chain, pm me what condition it's in and a price.

[f4istunna]

sold oil tank and steering stem, list updated.

[jrok]

Are the black side panels the old style with the dimples, or the newer style smooth ones?

[Drifterboy3]

Still have the rear shock? Can you quote shipping to 45230

[f4istunna]

ya i have the rear shock shipping is going to be $15

[Drifterboy3]

pm sent

[cheater13]

If you have a rear skid plate, pm me.

[ned02]

do you happen to have the rear rotor hub?