Parts

[joe0718]

Cleaning out the attic. I have the following parts that I no longer need to hold on to. Make an offer if interested in anything.


-4 Aluminum wheels
-6 OE steel rear rims with Kenda 18-7-7 tires
-6 OE steel front rims
-2 sets of stock electric starter gears/clutch
-2 Tail lights (1 new 1 used)
-6 Stock front shocks
-2 Stock rear shocks
-OE square tube swing arm (shock mount was repaired)
-Stock lc 50cc steel cylinder
- Stock lc 70cc steel cylinder
-Stock upper and lower a-arms off a DRR 50 41” width
-Front brake line from a a DRR 50 41” width
-Carb and boot off a 2008 lc DRR 50 (16mm Sunworld???)
-Oil tank (new take off)
-2 starters (1 used and 1 new take off)
-Stock 1 piece pipe off a 2008 lc DRR 50
-2 Stock ignition stators

[fomospede]

how much for 70cc cylinder shipped to 61109
is head included?

[fastrnrik]

I am also interested in the 70 cyl , and the square tube swingarm

[joe0718]

70 cyl. with head and piston shipped to 61109 $140. Low hours. Came off a 2011 DRR.

[joe0718]

Also just found a Koso pipe w/o silencer off a DRR 50 production. I ran it with a Mallossi 50cc cyl.

[joe0718]

Square tube swing arm $100 plus shipping.

[joe0718]

No reasonable offer refused. Need to make space.

[boylan300ex]

interested in 1 set of starter gears and clutch

[joe0718]

$20 plus shipping for both sets. One new take off and one used.

[ramey-racing28]

Are any of the aluminum wheels fronts? If so will they fit a Drr 90?

[joe0718]

Yes I have 2 ITP aluminum front wheels with or without Maxxas Razar 19x6x10 tires. They are off a DRR.