do i have mayier plastic???

[chargerlover]

how is the front plastics held on oem my bikes front plastics dont seem right to me an the side panels are to short it seems they wont fot over the fuel turn off its like inch to short to get to it it sits to high i seen that oem side panels do not fit mayer front plastics so im wondering if it has mayer front plastics with factory side panels but it also has bolts threw the front finders to hold them on an i dont see bolts are vids of reguler 400ex bikes...if they mayier will they say so anywhere??

[CJM]

pics?

[chargerlover]

see how the plastic is lined up an it wont go over the fuel cutout

http://i597.photobucket.com/albums/tt51/chargerloverrt/2011-10-06185231.jpg

http://i597.photobucket.com/albums/tt51/chargerloverrt/2011-09-27111409.jpg

http://i597.photobucket.com/albums/tt51/chargerloverrt/2011-09-26151158.jpg

i also noticed that i dont have the square in the fenders for the safty stickers...and my seat says honda i thought they all said fourtrax

[CJM]

Yea Id say you have some maiers or maybe just maier side panels, a maier rear and a stock front (hard to tell). No side panels EVER came in red unless they are painted and all the older side panels have little round circles on them, newer ones are solid.

I lean towards something not adding up, its all ziptied together.

As for the seat, later models said honda, older models said fourtrax.

[chargerlover]

hmm the side panels are red plastic for sure not paint. guess i should look at some maier side panels an see if they look the same any models not come with the square indents in the front plastics where the safty stickers were..mine was all smooth

[Stickman400]

You've got Maier fronts and side panels and stock rears. My friend had Maier all around and they make you drill holes and use pan head screws to secure them. Usually they have the side panels built into the front fenders, but you can get them seperated like yours.

[chargerlover]

well i pulled the body parts including the front that i never have unbolted when i unbolted it an then put the side panel where it needed to be i could see that the brackets holding the front fender on was to short throwing everything out of wack..so i just need to make some l brackets an it will all fit nice an pretty. so i do have maier front an side any way to tell abot the rear,,

[BlasterEaten250]

Originally posted by Stickman400
You've got Maier fronts and side panels and stock rears. My friend had Maier all around and they make you drill holes and use pan head screws to secure them. Usually they have the side panels built into the front fenders, but you can get them seperated like yours. This!
Can you tell if the back fenders are painted? They are either painted stock fenders or Maiers. Maiers have brackets that support the rear fenders but they don't have to necessarily be installed...

[chargerlover]

stock 400 never came black in the rear?

[HondaRacing83]

you have maier fronts? i dont get where people are getting stock fronts. the fenders are styled differently. and they never had black rears unless you got like stock 06 or 07 rears.

[chargerlover]

yes its maier front an sides. im assuming maier rear to. now that it all fits time to buy some sweet graphics..

[Stickman400]

Your rears are either maiers that aren't mounted using the pan head screws or they are 06-07 stock black ones. But if they were stock ones they would have the flat spot on the left side for the tire pressure safety warning label. I don't see that so I'm guessing they just installed the maiers without the brackets they supply, or it's some other brand. Lakers maybe? Idk

[chargerlover]

hmm i don't even see anywhere for it to be bolted it is floppy tho lol an it touched the exhaust an got melted

[BlasterEaten250]

There isn't really a place you could tell they would be mounted. It requires drilling holes in the fenders so if the brackets were never installed you could never tell they should be on there. I don't think they are lakers because if I remember right lakers look a little different than stock rear fenders.

If they are floppy, they are probably Maiers :p

[exrider12]

It looks like you have Maier front plastics and then someone tried to put 05+ trx rear plastics and side panels on..

Correct me if Im wrong but that should throw something out of whack

[chargerlover]

it all fits now fron plastics were not mounted right

[finsteratv]

update pics!