A-ARM help

[Flyracer219]

Just bought this honda 450r, does anyone know what kind of a-arms these are? thanks

[400exrider707]

JB racing possibly....

[legitLT]

they look stout

[Kovatch]

My friends run a design VERY similar and theirs are Houser. However, they ride YFZs and Houser has changed their design a few times with MGC and such. Although I am a little confused with the removable lower ball joint. They [houser] also add their gusset below the lower a-arm tube. Jodi (JB) adds the gusset to the top side of the lower a-arm to strengthen the shock mount.

See my pic below of the Houser A-arms. This is a stock photo from Google images with a different lower ball joint.

[Kovatch]

JB a-arms on Uppy's bike.

[Flyracer219]

yeah im not sure what exactly they are haha thanks for all the help tho, they were on there when i bought the bike, and on the other thread they decided laeger's? so im still not sure

[hartwill]

Those are laeger arms...

[400exrider707]

They do look a LOT like Laegers. Laeger does use grease zirk fittings on the lower arm where it attaches to the frame though...

[Kovatch]

I retract my statement about them being Houser. That removable ball joint wants me to believe they are Laegers, but without that grease zerk. Now I'm lost.

[Flyracer219]

They have the zerks, they are on the bottom of both the lowers and uppers

[pondy]

deffo laegers

[65 Designs]

JBs will have 1 1/8" tubing on the lowers with a 7/8 diameter cross tube. Uppers arms will be made from 7/8 tubing.

Leagers will be made from 1" tubing on the lowers with a 3/4 diameter U shaped cross tube and have 3/4 tubing for the upper arms. Upper arms may be 7/8 I don't know if they made them sililar to the pro trax upper arms.

Hope that helps.

cheers

[slainwarrior]

they're leagers or jd performance which are the exact same a arms.. dave from jd performance is who use to build leagers a arms