where to buy 14mm ball joints

[steve181]

who carrys these?

burgard wont send mine so im gunna have to get them somewhere else

tired of not being able to ride

need 2x 14mm ball joints that fit older style houser arms

http://www.burgardcycle.com/xc2/images/P/14mm%20Ball%20Joint%20%232.JPG

[dustin_j]

They are $20 apiece from JB racing. You can also get them from an auto parts store, they were used as tie rod ends on late 60s VW Beetles and Transporter (van). I know the ones from JB are zinc coated to prevent rust, not sure on the others.

[riotact]

They are 14.99 at autozone. Right outer tie rod end from 74 VW Beetle.

Edit:I might be wrong on that,those might be 12mm.Take the lock nut with you to double check the thread size before you buy them.

[powerbomb400]

Before you put them on if you have a grease needle stick it under the boot and give it a shot of moly grease they will last alot longer.

[Langbolt]

Go to NAPA - AutoZONE - Pep Boys

Look up 1991 GMC Tracker outer Tie Rod

Part# ES3045RL

:devil:

[99_300ex]

What else will these tie rod ends fit?

[ride red 14]

78 vw transporter tierod ends. can't remember if its the inner or outer. one or the other are left hand threads. look them up on napa's website. i think i gave around $18 a peice for the last one's i bought. came with grease fittings too.