Ballpark my jetting on the PWK28's ?

[Muggzy]

Can anyone ballpark my jetting on the PWK28's? I have NO mains or Pilots right now and the needles are N68A. All I can find on the carbs says that the 'A' on the needles means they are the richest needles.

My banshee has the following:

[Muggzy]

Hellooooooo? Bueller? Bueller?

[sand_blaster]

I'm all the way out west, but i'll tear mine apart here in a few to help you. I run the pc's too

[kodie]

I have a similar set up to you except I have a 4 mil stroker crank and 30 mm oko carbs.

I started with 160 mains and 50 pilots. Ended up landing on 150 mains and 45 pilots with n68a needle in 2nd position from the top.

It is hard to give you the exact main and pilot and clip position to put in it. You will have to start and work up or down depending on what your spark plugs look like as you are jetting it.

[Muggzy]

"It is hard to give you the exact main and pilot and clip position to put in it. " That's why I said ballpark ;) Thanks.

[kodie]

Right on, let me know how its running.

[Muggzy]

Thanks! Probably next weekend by the time I get the jets.

[jimmyjam400ex]

check out bansheehq.com youll probably be able to find somone with the same set up