View Full Version : what brake
400exshop
09-19-2011, 06:51 PM
what other rear brake will fit the 99-04 400ex?
honda400ex2003
09-19-2011, 07:13 PM
fronts or back eric? i have heard the yfz back works for the back but cant confirm it. it seems like the fronts also work on the spindles but again, i havent tested it. just seems like i read it a while back.
450 stuff will work with the corresponding spindles for the fronts and the carrier and such for the back which is a pain
250r would be the same
at least they are all dual piston ones
i would try to look into the yfz stuff though, that would be your best bet i think.
steve
hocman123
09-19-2011, 07:17 PM
if its the fronts the yfz 450 will mount right up on the stock spindles and is a nice improvment b/c it is a dual piston caliber. i have done it myself and it is great.
but i do not know if the rear mount up
Stickman400
09-19-2011, 08:18 PM
I think the rear will only work with 450R brakes. And you have to use the 450s rotor and hub. 250R will work also but its not a dual piston so you don't gain anything. The 450 setup you gain alittle ground clearance and dual pistons.
400exshop
09-20-2011, 07:05 AM
Need it for the rear. any one have one for sale?
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.