jdm400ex
09-13-2011, 04:35 PM
Hey all! I'm new to this so bare with me. I have an 07 400ex. i realized my brake pads were real worn down (just about metal to metal), so i ordered some new pads. I took the caliper off, took out the old pads and tried to compress the piston with a c- clamp. This didnt work so i removed the parking brake assembly and , I don't know if it just released pressure or what but it let me compress the piston. So i re-installed it and put the new pads in. The problem is my brake pedal goes all the way down no pressure and back up. It's like there's no pressure in the system at all. I tried back filling the caliper but I;m afraid I pumped air back into the caliper causing a cushion on the piston. How do i completely start over and get my brakes to have pressure on them again. I'm trying to go to Slades in Surry, VA on Saturday so if you know how to help plllleeeeeaaaaaasssssseeeeee do.
Thanks
Justin
Thanks
Justin