View Full Version : Need help, kfx wont start
piejazz96
09-09-2011, 12:53 PM
Ok, I went to start my kfx today and as soon as I turned on the key, the fan immediately turns on. I didnt think much of it and thought it would turn off. I went to start the quad and wont run. Just the starter going but nothing. Also, one of the red lights comes on but that has been like that even before the fan started coming on. I never had any problems with it starting before as well.
BEARAZZ
09-13-2011, 05:17 PM
check the wire coming out of the back of your cylinder/head.. Think it may be orange ..but there will be a sensor you can see on the back side. Follow that wire to your main harness.. Where it goes in over your frame it will wear and cause a short.
piejazz96
09-13-2011, 05:26 PM
The water temp sensor?
BEARAZZ
09-13-2011, 07:22 PM
yea.. mine shorted out there and messed mine up before.. Also the roll over sensor wires where they come out of the sensor rub the frame.. spread them apart where they are not touching each other or the frame and see if that helps.. The grounds also get messed up alot so check them
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.