RPM Front Hub Bearings

[Meat]

Hey guys I have a set of RPM billet front hubs that need new bearings. Does anyone have the bearing's part number and/or a cheap supplier ?? They're the tapered style bearings BTW.

[fourtrax_r]

i think i have a few sets, i'll look tomorrow

[danhung11]

Same here, need some replacements for my harkor hubs.

Thanks in advance!

[Meat]

bump

[atv fan 28]

Originally posted by danhung11
Same here, need some replacements for my harkor hubs.

Thanks in advance!

What about this? http://www.hardkorengineering.com/Results.html?command=search&db=HARDKOR.db&eqSKUdata=150A-250R&CAT=Front%20Hubs%20and%20Accessories&TITLE=Bearing%20%26%20Seal%20Rebuild%20Kit%20for%2 0Honda%201988%20-%2089%20TRX250R

[danhung11]

Originally posted by atv fan 28
What about this? http://www.hardkorengineering.com/Results.html?command=search&db=HARDKOR.db&eqSKUdata=150A-250R&CAT=Front%20Hubs%20and%20Accessories&TITLE=Bearing%20%26%20Seal%20Rebuild%20Kit%20for%2 0Honda%201988%20-%2089%20TRX250R

Those are the ones, however a cheaper supplier would be nice. I think that's what we were originally after. $105 for bearings is a little pricey. :ermm:

[atv fan 28]

There is a Applied Technology a couple miles from my house. I have not bought any bearings from there but i did a buy a couple of those large snap rings for the brake stay. I dont know how their pricing is on bearings but i can find out.

http://www.applied.com/site.cfm/bearings_new.cfm?WT.ac=Bearings_Home

[Meat]

ya a Timkin part number would be sweet.

[atv fan 28]

Originally posted by Meat
ya a Timkin part number would be sweet.

I will check my bearing #s tomorrow and let you know!

[atv fan 28]

Timkin part #s

Inner bearing 32004X

Outer bearing A4059

Hope this helps.

I done some searching and and it looks like if you buy the Timkin brand, you are going to spend close to 90 bucks for just the bearings!! The inner bearing is usually around 24 bucks and the outer bearing is around 20 bucks! Maybe someone else can find a place that has them cheaper!!

[destey]

holy moly $105! I saw an ad for this type of hub/bearing. Says it lasts 5x longer than ball bearings. Didn't say it costs 5x!

[Meat]

atv fan 28 thank you so much. That was the info I was looking for. You're awesome. I'll have to do some research and see what I can find.

thanks again...

[danhung11]

Originally posted by Meat
atv fan 28 thank you so much. That was the info I was looking for. You're awesome. I'll have to do some research and see what I can find.

thanks again...

X2 Wayne! And thanks for reminding me I needed some. :p