ccp steering dampner/stabilizer

[Motofool250r]

Well i started this thread on the other 250r site but thought id put it over here too.

Here is a link to what im talking about.
http://www.exriders.com/vbb/showthread.php?s=&threadid=349366&highlight=steering+stabilizer

trying to get these made for the 86-87 frames and the 88-89 frames, also enough info so we can purchase them for the aftermarket frames aswell.

So as it sits today i need some measurements and information to move forward.


Got a Reply from the CNC guy, he will make us a dampner if we provide the info below

need the angle of the steering stem to frame rails and some good quality Photos, to send him.
also Steering stem Diameters.

So hook me up fellas need the info for 86-87, and 88-89,


the info i got from my father as im away from the house is this for a 87 frame
4.25 in"s between rectangular frame rails
13/16 wide~ .880------ 1 in" high~ 1.04 on this frame
it will have to mount behind the steering stem instead of in front.

check my info/math with yours

[Motofool250r]

For aftermarket Frames the 400ex/450r frame rails are the same distance apart as my LSR and my JP racing frame

the only question left is the stem to frame rail angle.

LSR is 4.07"
JP Racing Frame is 4.15 "

all 1" tubing

400ex frame is 4.1" apart inside to inside