400ex a arm bushings or bearings?

[jkosakowski]

If i buy a a arm bushing kit do i still need to buy bearings or do the bushings just replace the baerings?:confused:

[NMills]

I think it depends on the kit... which one are you getting?/

[jkosakowski]

tHIS IS THE ONE I WAS LOOKING AT ITS ON EBAY MODQUAD A-ARM BUSHINGS 16 PIECES BLACK HONDA TRX 400EX.

[jkosakowski]

BUMP

[powerbomb400]

I use bushings. Make sure it has a steel sleeve to go in the center. I also drilled mine and put a zerk fitting in the center so I can keep it greased.I pay about 55.00 for a new set about every 6 months. We ride alot in the mountains and mud and dirt is hard on them. I was going thru bearings every 6months and they were costing me more.

[jkosakowski]

Ok Thanks :)

[Nick24]

So, I just bought this same kit (modquad 16 piece delrin bushing kit)... Do the bushings and sleeves go in place of the bearings or what ever that are in the a-arms from the factory?

Thanks, Nick

[powerbomb400]

Yes the bushings go in the a-arm and the sleeve goes inside the bushing. Then the bolt goes thru the sleeve as you install the a-arm back to the frame.