Is there a governor on a '05 TRX450R?

[Waddell5]

^^^^ If so, could someone tell me how to disable it? I'm about to get my dad's 450 and I don't want any limits lol

[ss440ex]

There is a little black spring loaded lever on the /RH side of the handle bars...
Push it forward towards the front bumper once started!
Good luck...:D

[finsteratv]

Originally posted by ss440ex
There is a little black spring loaded lever on the /RH side of the handle bars...
Push it forward towards the front bumper once started!
Good luck...:D
i wish i knew! thats why i get beaten by my brothers old 250ex :huh

[DnB_racing]

Originally posted by Waddell5
^^^^ If so, could someone tell me how to disable it? I'm about to get my dad's 450 and I don't want any limits lol this govenor has the put the largest limits on your quad, as far as disabling you need to terminate it

[chronicsmoke]

ITS NOT A TUMOR!!

[rooster300ex]

There is no governor on a trx450r. It has a rev limiter though, but unless u do engine work its not gonna make anymore power after it hits the limiter.

[Waddell5]

Thanks guys

[brewster426]

Turn the canuter valve to the right..you can also adjust the fuel mahaducadulator.

[finsteratv]

Originally posted by brewster426
Turn the canuter valve to the right..you can also adjust the fuel mahaducadulator.
dont forget the flardunker under the air box.

[jesshamner]

Loosen up the muffler bearings so they spin freely. Sometimes they are too tight from the factory and the resistance will slow you down.

[finsteratv]

Originally posted by jesshamner
Loosen up the muffler bearings so they spin freely. Sometimes they are too tight from the factory and the resistance will slow you down. THAT REALLLLLY opened mine up.

[ss440ex]

I don`t like changing the torque of the bearings, manual said not to!
I went to Ace Hardware,and bought a MATCHING ceramic set for like $56.00.
Money well spent!
p/n# 04-2012-450r-bulshet.

LOL...
I quit!:)

[Balaz_73*00]

I run 2 lug nut per wheel, less rotating mass = more power

[jesshamner]

You could get the red powerband and make sure it seats good on the flipple wheel. Its one of the best mods I have done.

[01boneless]

my best friends, brother's cousins, aunts ,sisters, sons ,friend used a plastic piston for less weight and ran strait kerosene( with octane boster of corse) and it can beat a 595ex no problem!!!!

[89trx250r]

Why would you have a 595ex that would be the biggest waste...But as was stated dont forget to adjust your powerband :)

[01boneless]

a waste son that thing will out run a corvet lol but still not as fast as the 450r with the plastic piston.!

[fastrnrik]

Originally posted by chronicsmoke
ITS NOT A TUMOR!!

bwuahhhh hahahahahaha. it's not a too-muh! LOL

[robinson446]

guys its the finagen pin ,tighten the nut behind the handle bars and all will be fine

[DnB_racing]

not on the 450r but Suzuki does have a govenor on it ... here is a pic of were its located

[jpfmotors]

may sure you dont use winter air in the tires during the summer time its to heavy slows down the quad