Aftermarket carb for a txl 90?

[zack221]

Is there any keihin carbs or anything that will work on a eton txl 90.

[zack221]

I read that a keihin pe 24 carb will work. Anyone know if that is right?

[bloodswet&gears]

A pe or a pwk will work. Not with the stock intake boot. You will need an intake like a koso or stage 6. Will also need an air filter to fit the carb. Like a UNI. There is also knock off versions of a keihin pwk. Range from 21-30mm. May also have to have a throttle cable and an intake spacer.

[LT Bill]

I got a Pe 24 mm 50 bucks plus shipping

[nastynotchback1]

i got a koso intake for 30.00 with the boot.

[zack221]

I would buy them if I knew I could get it all to work. Anyone have any pictures of there aftermarket carb and intake setup?

[bloodswet&gears]

You want pics of one installed or the ones 4 sale.

[nastynotchback1]

Originally posted by bloodswet&gears
You want pics of one installed or the ones 4 sale.


it works.Already been there and done that but no pics of it.

[Christiansdad]

We had a koso front facing intake and a 24mm pwk keihin carb.. had to use the RED non threaded throttle cable on our eton 90(its a drr style cable). Worked great once you get past the jetting. Could have went to a bigger carb but it ran fine with that. Wish i had some pictures to show but no longer have the quad. The intake stuff is 80 bucks new
The carb is about 130 or so new
The cable is about 20 new
The uni was 20 new
Jet kit was 25 or 30
stage 6 piliot kit was about 30...it fits kiehin..
Buying used stuff is always the ticket...80 bucks for the intake and carb isnt bad..everything else you pretty much try to buy new anyway

[zack221]

Sorry I completely forgot about this any chance you all still have the parts?

[nastynotchback1]

I still got the intake

[zack221]

Pm sent

[zack221]

Intake is here. Anyone have a carb for this setup?

[Full Throttle00]

Have a brand new Keihin PWK28 & new Koso power intake, carb boot, new reedcage (fiberglass reeds) gaskets & bolts $175 shipped or $140 for carb shipped

New Intake spacer + gasket $25 (improved throttle response)