bkb88
08-16-2011, 06:31 PM
Hey guys, as some of you may remember I started on this project back in the spring while I was doing my engine rebuild. Now I have finally completed installing my stock XR400 clutch cover on my 400ex. Here are some pics:
http://i100.photobucket.com/albums/m14/thebutelr/SANY0003.jpg
http://i100.photobucket.com/albums/m14/thebutelr/SANY0002.jpg
Parts for install:
-XR400 inner clutch cover w/ kickstart hole welded shut
-Any year XR400 inner clutch hub and outer plate (the part that the grooves on the metal plates rest on and the outer cover that holds the assembly together).
-XR400 steel plates (can use 400ex fibers)
-XR400 clutch springs
-XR400 clutch actuator arm
Also, the clutch cable holder had to be modified to fit on the XR side case. I still need to cut off the excess sticking out but everything seems to be running fine. I was also able to still use the stock 400ex clutch basket!
http://i100.photobucket.com/albums/m14/thebutelr/SANY0003.jpg
http://i100.photobucket.com/albums/m14/thebutelr/SANY0002.jpg
Parts for install:
-XR400 inner clutch cover w/ kickstart hole welded shut
-Any year XR400 inner clutch hub and outer plate (the part that the grooves on the metal plates rest on and the outer cover that holds the assembly together).
-XR400 steel plates (can use 400ex fibers)
-XR400 clutch springs
-XR400 clutch actuator arm
Also, the clutch cable holder had to be modified to fit on the XR side case. I still need to cut off the excess sticking out but everything seems to be running fine. I was also able to still use the stock 400ex clutch basket!