Razr psi

[GAZ-V-21]

I got the razrs on now and was wondering how much air you guys recomend they say 36 should I put that much in or will that make them to hard for trail rides?

[Scro]

36 psi is the amount they say you should never go over. You will want to be somewhere between 6-9 psi.

[GAZ-V-21]

Wow that is lower than I thought lol good thing I asked

[01boneless]

i run 5 without beadlocks and about 2 with beadlocks

[Stickman400]

I run 2 1/2 psi in my Razr 2s on ITP baja rims. I've never had them come of the bead yet. I don't do alot of hardcore riding or racing though.

[honda400ex2003]

4 backs and 6 fronts for me 36 is just for beading purposes when installing them on the rims.

steve

[vinson581]

4 in the back 4.5 in the front have yet to find a better pressure.

that is on razr 6 ply rears, and razr II fronts.

razr mx's i run 4.5 rear and 5 front.

dont even try running them at 36 psi(that is the max for seating the bead) you will destroy the tires not to mention the ride will be unbearable

[DragonGunner]

For MX most like running around 10 rear, even with beadlocks, much less than 5 without beadlocks an a good jump will egg your rims I promise. I run 8 to 10 up front for everything. For trail riding 5 on the rear is plenty, an as low as 2 when its really sandy or muddy.

[GAZ-V-21]

New shoes

[GAZ-V-21]

Pic

[supertrooper90]

I run 4.5 psi up front and 4 out back. six ply tires... Ive had one flat in like 4 years of riding.