A/F screw setting HELP

[Thumpin440ex]

Hey guys have a stone stock ds650.. Pulled the carb apart to fix a leak, put it back together.. I removed the af screw, like a dumb ***** I didn't count how far in/out it was. It use to start on the first or second crank, now it takes a bit for it to start.. Any advice would be great.. Thanks


John

[Thumpin440ex]

Anyone??


John

[Maniacdriver]

I would start at 1 3/4 turns out from seated.

[Thumpin440ex]

Yah I am about 2 turns out on it, it is starting up.. I think I might have bent the needle arm, because now it hesitating bad before it clears up while riding.. I am stumped, because I only had the bowl of the carb, that A/F screw out.. So i guess I will take a look tom at if that tab that the needle hangs on is bent.. I have tried to adjust the screw to rid the hesitation, but no luck.. :(

John