Herrmann a-arms

[DVXchic]

Is herrmann racing still in business, i need some bushings for a set of a-arms, any help would be appreciated.

[400exrider707]

Have you tried calling the shop?
http://www.herrmannracing.com/

[DVXchic]

yup, but said phone lines not in service

[eastside 400]

they are no longer in business, i live in the town and the shop has been empty for around a year now

[DVXchic]

Thank you.

[reconmaster]

take the bearings out incase they are different chances are slim that they are and go to a shop that sells bearings or your local dealer/parts shop they usually can get you almost any type of bearing (there should be a part number on the bearing) thats what i did when i solid my houser swing i had to get bearings for the axle carrier

[DVXchic]

I managed to find a ball joint at napa auto parts and used some bushing out of an old set of blaster a arms and turned them down on a lathe to fit the herrmanns.
Thanks for the responses.

[Ralph]

Also check McMaster for bushings. They have everything.