PDA

View Full Version : Jetting help, 04 Predator 50 w/ Uni clamp-on 16mm Sunworld


JM317
08-08-2011, 02:12 PM
I have an 04 predator 50 2 stroke w/ 16mm Sunworld and Uni clamp-on. The only other mods are oil injection removed and Boyesen reeds. It still has stock exhaust, elevation is 1000ft. Anybody have a good starting point? I've got a handful of mains, not sure if I'll need any extra pilots? Any help is greatly appreciated!
Doug10
08-08-2011, 06:36 PM
check your pm's
JM317
08-14-2011, 04:58 PM
Just want to thank Doug10 for the help, got everything squared away and running good for most of the weekend. I think I'm having throttle cable issues now lol. Seems like it started sticking after riding for awhile. Maybe I need the aftermarket single cable?
Doug10
08-14-2011, 08:45 PM
Did you end up going with a 22.5p and a 100 main?

I still have the stock cable with no problems yet, i just took it apart with it goes from 1 to 2 and removed the entire cable so there would be no issues in the future. One day ill get a single cable.

Doug
nastynotchback1
08-15-2011, 06:56 AM
Originally posted by JM317
Just want to thank Doug10 for the help, got everything squared away and running good for most of the weekend. I think I'm having throttle cable issues now lol. Seems like it started sticking after riding for awhile. Maybe I need the aftermarket single cable?


Single pull cable should be installed and it will make the throttle easier to push also.
JM317
08-15-2011, 07:23 AM
I have the 22.5 pilot, needle in lowest clip and 95 main for now. I have a 100 main, I may use it if I install that pipe. I guess clutch parts are next. I'll check the cable and see about pulling the injection side off. Who has the best priced aftermarket cable?
nastynotchback1
08-15-2011, 08:15 AM
Originally posted by JM317
I have the 22.5 pilot, needle in lowest clip and 95 main for now. I have a 100 main, I may use it if I install that pipe. I guess clutch parts are next. I'll check the cable and see about pulling the injection side off. Who has the best priced aftermarket cable?

http://www.maximumrpm.com/index.php?p=product&id=67&parent=5


this should be the type cable you need.
JM317
08-16-2011, 11:08 AM
Originally posted by nastynotchback1
http://www.maximumrpm.com/index.php?p=product&id=67&parent=5


this should be the type cable you need.

Thanks for the link!
Doug10
08-16-2011, 08:15 PM
I am fighting the clutch monster now.