Is This All I Need?

[steve181]

rolled the 400 and broke the tire off where the wheel meets the a-arm



pretty sure i need

2 tie rod ends
1 tie rod

so basicly this

http://tinyurl.com/3jbnh48

and

http://tinyurl.com/43cr2s9


http://i51.tinypic.com/6504sj.jpg


right?

[DnB_racing]

one of your links is down,

but from looking at pic it hard to tell the size of the ball joints,
if possible get the 16mm thick ones at least on the bottom, do both sides if they are 14mm, and replace with 16 if possible,

and make sure to thread the bottom all the way into the a arm

[HondaPohl]

Ouch! Make sure you didnt bend anythng.

[DragonGunner]

From the picture looks like you need upper an lower balljoints. Your tie rod ends are probably ok, just check you tie rod an see if its bent....may need a new one of those too or try an bend it back in shape......Thats what my 400EX looked like after a head on collision with a motocycle...plus a badly bent bumper.

[CJM]

Looks to me that you need:
-Tie rod and ends
-New ball joints
-Possibly the spindle-check to see if its bent.

Oughta cover it. You will find out quick if the frames bent when you put it back together too.

[HondaPohl]

Just curious. How did you bit it?

[steve181]

Originally posted by HondaPohl
Just curious. How did you bit it?

4th gear wheelie down the road

for some reason it pulled up super hard and i wasnt expecting it