04 05 trx450r suspension setup???

[450rstroker]

whats your guys preferd lt setup on the 04 05 trx450r. what you think works the best holds up n so on. i wanna hear all the diffrent opinions and setups.

[DnB_racing]

Originally posted by 450rstroker
whats your guys preferd lt setup on the 04 05 trx450r. what you think works the best holds up n so on. i wanna hear all the diffrent opinions and setups. what type of riding? and what budget? this question is open to too many different choices

[450rstroker]

mx and no budget

[DnB_racing]

whats your ability and weight, and who will be tuning your suspension at the track

[450rstroker]

im just wantin peoples opinion on what they run n like i weight 200 and run a class

[mx Eli]

walsh ltr set up with pep pb1 shocks

[Lquad71]

Front-
PB-1 hands down
as for a arms, the walsh and jb quality you cant beat
but i like the houser arms because of the slicast adjustment for different tracks and the adjustment for camber doesnt interfere with caster which is much easier to work on. The sealed ball joints are my personal preference because i have it when my quad would squeak with jb heims. The houser arms also have grease zerks and needle bearings which make them very smooth and quiet. havent had any problems with quality on the housers either.
I havent tried the ltr setup with houser but another bike i rode with the ltr spindles and walsh front end handled better than anything ive ever rode.


Rear-PEP dual rate zps for shocks
and if you have no budget i would go with walsh, but i run a 2006 swinger with a lsr dc-6 linkage and it handles almost as nice as the walsh rear end.

[ThumPIN_450R]

t-pin front end LSR outlaw rear end with p.e.p. shocks is what I run on my bike and I love it.

[MX450]

Walsh Flows, JB superlink, PEP

/ Thread

[450rstroker]

why does everyone like the ltr spindels so much?

[spanky101]

I haven't rode the ltr setup but from my understanding it is for better turning and less bump steer

[450rstroker]

well hell the stock 450r caliper n everything bolts right up still?

[Kovatch]

JB/LTR spindles/PB-1s

The TRX spindles will NOT bolt up properly to the A-arms that are designed to use the LTR spindles. You have to get LT TRX a-arms to run TRX spindles.

[MX450]

Originally posted by 450rstroker
well hell the stock 450r caliper n everything bolts right up still?

No you have to run suzuki calipers, hubs, spindles ect.