brake line

[crf 100]

when you put on extended a arms do you have get lengthend brake line

[yfzfelix]

you could install the stock lines and then lift the front of the quad off the ground to fully extend the arms and see if the lines are stretched tight, my son races MX and runs a dual line off the master cylinder, he says the braking is much better that way, Steve

[jweidner]

If you intend to intall hydraulic front brake set up(400 or 450 honda) you will have to install brake lines along with the master cylinder on the bars. Most after market a-arms you will need to change over to hydraulic.

Instead of running single a-arms switch to double a-arms so that you can have longer travel and you are able to adjust camber and caster.