PDA

View Full Version : reeds, is this correct?


88250RGuy
07-12-2011, 09:42 PM
hey guys found out my r has a reed spacer. the bike is all disessembled and i found it in a bag. this is how I have assembled it...is it correct? threw a pic of the atv in there too

http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2764.jpg
http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2763.jpg
http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2761.jpg
also about to mount the motor, im not sure how the rear brackets go can anyone help? thanks! I am 16
bloodswet&gears
07-12-2011, 09:51 PM
No.Put it between cylinder and reed cage.
88250RGuy
07-12-2011, 09:55 PM
oh okay, thought it may have gone like that is my gaskets in right places dont want any air getting in, thanks so much -Brian
danhung11
07-12-2011, 09:56 PM
The spacer is intended to increase crank case volume, it should be before the reeds. Your frame looks like a 88-89 style, does not use the rear motor mount that detaches from the frame. The frame should have a rear upper mount welded in from the factory. It's hard to tell from your picture you posted. Snap a couple more of the foot peg and swingarm area.

Hope this helps bud.
bloodswet&gears
07-12-2011, 10:00 PM
Its a 88 or 89.
danhung11
07-12-2011, 10:01 PM
Gaskets are needed between touching metal surfaces, wipe a thin coat of oil on both sides of the gaskets before mating the surfaces. Remember to clean all surfaces before doing so.
bloodswet&gears
07-12-2011, 10:03 PM
Looks like its had some welding done in the footpeg area.
88250RGuy
07-12-2011, 10:15 PM
its got extended foot pegs ill snap some pics of frame one minute
88250RGuy
07-12-2011, 10:23 PM
i never had this atv together...I have these mounts...I thought put 2 on motor mount holes and then the one on the chassis but it doesnt fit thanks for any help, personally i dont want those peg extensions but one side is welded on I have no choice right now lol
http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2765.jpg
http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2766.jpg
http://i236.photobucket.com/albums/ff193/1991yamahaventure480/Zi6_2767.jpg
danhung11
07-12-2011, 10:33 PM
Those are not OEM mounts. With the way it looks, the rear, lower, front, and upper head stay, should be plenty of stability when bolted up.
88250RGuy
07-12-2011, 10:45 PM
do i need any mounts at all? i found some triangular like mounts that fit on the front 2 mounts perfectly thanks for the help