Eton Transmission Gear Sets

[BMP Racing]

My daughter has a 50m Viper that has a full Stage6 setup. It has a small stock 145/70-6 tires and stock 420 pitch gearing. I tried to find some taller countershaft sprockets but came up short. The rear sprocket is small enough the chain almost touches the hub so I can't go any smaller there. Anyway, I looked at the parts on anythingatv.com and they list the 70 and 90's with a different transmission part #. Does anyone on here know the different ratios? How much top speed will we get with a 70-90 gear set? Thanks in advance!

Brad

[o4twinpeaks]

call rebel gear 931 788 1617

I switched mine over to 428 and picked up all the sprockets from rebel gear.

[o4twinpeaks]

they can do 420 also

bolt pattern is 4/110 honda pattern
I went to dwt wheels 8x6 in rear and 5x10 in front

[BMP Racing]

I thought I talked to them in the past and they didn't do anything that would work with my set up. I really don't want to change out the tires and wheels and like that it looks stone stock on the outside. anythingatv.com listed the transmission gear set for around $100.00, which would be a cheaper alternative. Thanks for the advice on the other things though.

Brad

[Full Throttle00]

pm sent

[Full Throttle00]

Have a 90 gear set or complete engine available.
Parting out 2006 90RXL

[pitviperacing]

Yes change all 3 gears and switch 2 428 sprockets will give you a much wider range!